Cleaning boilers is usually done through the use of chemicals to make cleaning faster and easier. However, when you use chemicals, you’re placing your family at great risk, and your boiler at possible severe destruction. The use of chemicals in boiler cleaning has been practiced for many years. Its main objective is to remove all the deposits safely from the boiler tubes. As you continue reading this article, you’ll find out the risks of applying this method.
What you should know about boiler cleaning!
- Older boilers operate between 55 percent to 80 percent efficiency rates, while newer systems work efficiently up to 97 percent.
- Dirty boilers downgrade efficiency whether your system is old or new.
- If your boiler is oversize, it may only operate at partial capacity thus lowering its combustion. If your boiler is undersize, it would not have the capacity to heat the entire house.
- Boiler cleaning can make an old boiler back to its original shape if it’s less than 20 years old unless it has a major problem. However, you should measure its combustion efficiency. Different operating results happen both on the old and new models. There are older models that run more than 20 years without any problem on efficiency. There are also new boilers that operate below its expected efficiency.
- If boiler cleaning is not possible, then, you have to install a brand new equipment to enjoy the benefit of getting the newest and most efficient heating technology on the market. Find a reputable company that is expert on boiler installation, and offers a flat rate on materials and labor.
The risks of chemical boiler cleaning:
Many experts agree that chemical cleaning can remove mounting deposits of solid adherent scales like calcium carbonate in low-pressure boilers. Cleaning through the use of chemicals can improve the heating efficiency of your boiler, and reduce the number of tube failures. However, there are many drawbacks against this method. One of the dangers is the possibility of chemical cleaning solution to find its way into your superheater after failing to flush it out. As soon as you operate the unit, the chemical cleaning solution will evaporate in the superheater causing it to fail.
If you think that boiler cleaning is a simple DIY process, you may be wrong. The more you try it, the more additional expenses you might incur when the unit breaks down. Don’t hesitate to let the experts do it for you.